Did you know:  Patent drawings submitted in Germany must follow a clear set of presentation rules. But here’s where it gets complicated: the applicable rules depend entirely on how you file.

If you’re submitting your application directly with the German Patent and Trademark Office (DPMA), Germany’s national requirements apply.

But if you’re filing through the European Patent Office (EPO), either directly or via the PCT regional phase, then EPO rules take precedence.  And if you’re entering Germany through the PCT national phase, you’re back to following DPMA’s own standards at the time of national entry.

Each route has its own formatting expectations, right from margins and figure labeling to file types and line quality. A small misstep can lead to formal objections, delayed examination, or loss of your filing date.

This article covers the 2025 patent drawing rules enforced by DPMA, including the standards that apply when filing nationally in Germany or entering through the PCT route.

If you’re filing through the EPO, please refer to our separate guide on EPO Patent Drawing Requirements for a detailed breakdown of that path.

epo patent drawing checklist

Let’s get started with the DPMA rules. 

DPMA Drawing Requirements for Utility and Design Applications

When filing a utility or design patent application directly with the DPMA, drawing rules are legally binding and defined by the Patentverordnung (Appendix 2 § 12). 

These rules apply to utility and design patent applications filed nationally in Germany.

The below sections answers practical questions about:

Let’s begin.

When Drawings Are Required by the DPMA

Knowing when or when not to include drawings can help you avoid unnecessary objections during formal examination. This section explains the key scenarios where drawings are required, optional, or requested later by the examiner.

1. Are patent drawings always required when filing a DPMA application?

No. Drawings are required only if they are essential to understand the invention. If your written description and claims fully disclose the invention without visual aid, you are not obligated to include drawings.  However, if the claims or specifications mentions them, those drawings must be included at filing.

2. Can applicants include drawings even if they are not strictly necessary?

Yes. Applicants may submit optional drawings to improve clarity or support the description, even if not strictly required. These drawings are accepted as long as they comply with DPMA’s formal requirements(appendix 2) and do not introduce new matter into the application.

3. Can the DPMA require drawings after the application is filed if none were included?

Yes, but only under specific conditions. If your application refers to drawings but they were not included at the time of filing, the DPMA will invite you to either submit the missing drawings or declare that the reference was made in error. You have one month from the date of the invitation to respond.

If you submit the drawings after this invitation, the filing date will shift to the date on which the drawings were received. If you choose not to submit them, the reference to the drawings is treated as if it was never made. Drawings cannot be added later to expand or correct the disclosure.

4. Are flowcharts and diagrams considered drawings?

Yes. Flowcharts, block diagrams, electrical diagrams, and similar representations are treated as official drawings,  provided they are “indispensable for understanding” the invention. These must still meet all formatting rules. 

5. What is the time limit if the DPMA requests missing drawings?

If the DPMA notices that your description refers to figures, but no drawings were included, they will issue an invitation under PatG § 35. You then have one month to comply or withdraw the reference.

6. Can an entire missing sheet of drawings be corrected later?

Only in a narrow case. Under PatG § 35, you may submit a missing drawing sheet if your filing refers to it. But you must comply within the one‑month window, otherwise the reference is ignored and the filing date may change. However, you cannot add entirely new figures or drawings not referenced in the original description.

7. Are corrections of obvious mistakes in drawings considered amendments?

No, provided the mistake is truly obvious. Under § 38 PatG, errors like a wrong figure label or a stray drafting stroke can be corrected on a replacement sheet without being treated as a substantive amendment, so long as the correction introduces no new matter.

8. When can drawings be amended during DPMA processing?

You may amend drawings during formal examination, but only to correct or replace existing sheets. DPMA does not allow new subject matter. Moreover, replacements must be submitted during the formal correction period, as defined by examiners. They must also match the original disclosure, and no new matter or additional figures may be introduced.

9. What if a drawing referenced in the description is missing from the application?

If your description or claims refer to drawings that were not submitted, DPMA issues an official invitation:

Recommended Read: Looking for tools that automatically meet these patent drawing requirements? Check out our list of the best patent drawing software options for 2025.

Sheet Size, Usable Area, and Margin Requirements for DPMA Drawings

DPMA drawings must meet exact formatting standards under Appendix 2 to § 12 PatV, addressing sheet dimensions, margins, and layout. These rules ensure clarity during formal processing and printing.

10. What sheet size is required for DPMA drawings?

Sheets must be DIN A4 (21 × 29.7 cm), preferably in portrait orientation. Landscape format is allowed if necessary, but sheets must remain single-sided and free of folds or damage.

11. What is the maximum usable surface area on a drawing sheet?

The usable drawing area must not exceed 26.2 × 17.0 cm on an A4 sheet.

12. Are borders or frames allowed around the drawing area?

No. Drawing sheets must not include frames or borders. However, optional scan marks (e.g., crosshair targets) may be added in the margins if needed.

13. What are the minimum margins required?

DPMA requires the following minimum margins on A4 drawing sheets:

The drawing must fit entirely within the usable area defined by these margins.

Pinch Patent Drawings

Placement and Format Rules for DPMA Drawings

Correct placement and formatting are essential to avoid objections from the DPMA. These rules define where drawings go, how sheets and figures are numbered, and how to handle amendments.

14. Where should drawings be placed in a DPMA application?

Drawings must be placed on separate A4 sheets and not included within the description, claims, or abstract. Moreover, each part of the application, including claims, description, drawings, and abstract, must start on its own sheet.

15. How should drawing sheets be numbered?

Each sheet must be numbered with consecutive Arabic numerals, placed in the center below the top margin. Moreover, each application component (description, claims, drawings, abstract) starts its own sequence. 

16. What format should be used for sheet numbers?

Sheet numbers must be clear and unambiguous, written in plain Arabic numerals, without any brackets, circles, or decorative markings. They must also be placed within the usable surface, not in the margins, and large enough to avoid confusion with figure reference signs.

17. How should individual figures be numbered?

Each figure must be numbered using consecutive Arabic numerals, such as 1, 2, 3, and so on. Figures must also be clearly separated, logically arranged on the sheet, and, where possible, presented in upright orientation. If multiple figures form one complete view across sheets, they must be laid out so they align correctly without overlapping.

Use of Text in DPMA Patent Drawings: What’s Allowed and How It Must Be Placed

Text within patent drawings is tightly regulated by the DPMA. This section clarifies what is permitted and how it must be formatted.

18. Is text allowed in DPMA patent drawings?

Yes, but only when absolutely necessary for understanding the invention. Strictly minimal labels such as “Section AB”, functional words, or schematic terms (e.g., “open”, “closed”) are allowed, but only in essential contexts(like those used in flow charts or block diagrams).

19. How must text be placed in a DPMA drawing?

Any permitted text must:

While not explicitly stated in the legal text, it is standard DPMA and EPO practice to place text with enough spacing so it can be replaced or translated without touching lines, hatching, or other graphical elements.

Drawing Standards: Line Quality, Proportions, and Reference Markings

Under Appendix 2 to § 12 of the Patentverordnung, DPMA enforces strict visual and formatting standards to ensure legibility and clarity of patent drawings. Let’s look at them. 

20. How should lines and strokes be executed?

All lines must be black, permanent, uniform in thickness, dark, and clearly defined. Drawings must be created using drawing instruments or CAD tools, and freehand is not allowed.

21. How should cross-sections be represented?

Cross-sections must use evenly spaced, oblique hatchings that do not interfere with reference symbols or lead lines. Exploded and perspective views are permitted if they enhance clarity.

22. What are the standards for scale and clarity?

Drawings must be detailed enough to remain legible after reduction to two-thirds size (as occurs during scanning). If the scale is included, it must be represented graphically, not textually.

23. How should scale be shown if needed?

Graphical scale bars are allowed. However, phrases like scale ½ or actual size are not. This ensures compatibility with digital processing systems and translation.

24. How should lettering and reference signs appear?

Characters must be at least 0.32 cm tall, in Latin letters (Greek only if necessary), and must not be enclosed within shapes or symbols.

25. Can lines be drawn freehand?

No. All lines must be created using drafting tools. Freehand is not allowed except in rare shading scenarios, and even then, clarity and reproducibility standards apply.

26. Can multiple figures appear on a single sheet?

Yes. Multiple figures (including exploded views) are allowed if arranged clearly and separated. If partial figures combine across sheets, they must align perfectly without overlap.

27. Must reference signs match those in the text?

Yes. Every reference sign used in drawings must appear in the description, abstract, claims, and vice versa. Drawings should not include reference signs not mentioned elsewhere.

28. How should the proportions of elements in drawings be maintained?

All elements in a figure must be shown in proportion to each other, unless different scales are essential for clarity (e.g., enlarged details). When different scales are used, they must not impair understanding.

29. What is the minimum height for numbers and letters in drawings?

Numbers, letters, and reference signs must be at least 0.32 cm high to ensure legibility after reduction.

30. How should figures be arranged on the drawing sheet?

Figures may appear on the same sheet if they are:

Source – Google Patents

If multiple sheets form a single figure, they must be arranged so the full figure can be assembled without hiding any parts.  All parts of a single figure must use the same scale, unless different scales are essential for clarity.

31. Can reference signs appear in the drawings if they are not mentioned in the description?

No. All reference signs used in drawings must also appear in the abstract, description or claims, and vice versa.

32. Should the same feature use the same reference sign across views?

Yes. The same reference sign must consistently denote the same feature across all figures and views. You may not assign the same number to different parts.

33. What if there are many reference signs in the drawings?

A separate reference sign list is optional but recommended when many characters are used. It aids clarity for examiners and improves communication.

34. Are photographs allowed instead of drawings in DPMA applications?

No, photographs are not mentioned as an accepted substitute for line drawings under current DPMA rules. While image files like TIFF, JPEG, and PDF are permitted for electronic filing (with grayscale limitations), these are intended for digitized drawings, not photographic content.

At the end of the day, navigating patent drawing standards isn’t just a box to check; it’s a compliance challenge. 

Getting patent drawings right is about legal precision. Whether you’re filing with the USPTO, DPMA, or another office, the smallest error in margins, figure numbering, or line quality can trigger delays or rejection.

That’s where Pinch comes in.

Pinch – The Smarter Way to Get DPMA-Compliant Patent Drawings

Pinch Patent Drawings

Patent drawings aren’t just illustrations; they’re part of your official legal disclosure. That means precision isn’t optional. Both the DPMA (Germany) and EPO (European Patent Office) enforce strict rules covering everything from sheet size and margins to line quality, figure layout, font size, and reference markings.

If that sounds like a lot to keep track of, Pinch Patent Drawings can help.

Just send us your CAD files or annotated sketches. We’ll return clean, fully compliant drawings that meet the exacting requirements of DPMA, EPO, or both This means:

What’s more? Sign up and the first use is on the house. Get started now!

Disclaimer:  This article summarizes official DPMA requirements as outlined in the Patentverordnung and Appendix 2 to § 12. While every effort has been made to simplify and present these rules accurately, future updates may not be reflected here. For the most current regulations, always refer to official DPMA sources or consult a qualified patent professional.

Leave a Reply

Your email address will not be published. Required fields are marked *