You’ve got the invention. You’ve written the claims. But now the Patent Cooperation Treaty (PCT) is asking about your patent drawings.
From sheet size to margin widths, figure numbering to text placement, there are a lot of critical rules to follow. Getting even one of them wrong can trigger delays, rejections, or worse, force you to start over.
Should you label your figures “Fig.”? Can you use color? How wide should the margins be? There are a lot of nuances that most applicants don’t even know to look out for.
That’s why we made this guide to break down everything about PCT drawing requirements. Plain English. No legal-speak. It has everything you need to know to get your patent drawings done right.
Looking for tools that automatically meet these patent drawing requirements? Check out our list of the best patent drawing software options for 2025.
PCT Drawing Requirements for Utility and Design Applications
When submitting a utility or design patent application under the Patent Cooperation Treaty, the requirements for drawings are strict and highly standardized. This section addresses common questions regarding when drawings are required, acceptable formats, sheet sizes, margin rules, and how to properly number views and sheets, as outlined in PCT Article 7.
- PCT Drawing Requirements and Acceptable Types
- Sheet Size, Usable Area, and Margin Requirements for Patent Drawings
- Placement and Format Rules for Drawings in Patent Applications
- Use of Text in Patent Drawings: What Is Permitted and How It Must Be Placed
- Special PCT Drawing Requirements: Line Quality, Proportions, Figures, and Reference Signs.
PCT Drawing Requirements and Acceptable Types
Patent drawings aren’t always required, but when they are, they must meet strict standards. This section explains when, why, and what types are acceptable.
Q1. Are patent drawings always required when filing under the PCT?
No, drawings are only required when they are necessary for understanding the invention.
Q2. Can applicants include drawings even if they are not strictly necessary?
Yes. If the invention can be illustrated by drawings, even if they are not necessary, the applicant may include such drawings in the international application at the time of filing.
Q3. Can a patent office later require drawings that were not submitted initially?
Yes. Any designated Office may require the applicant to file such drawings within a prescribed time limit, even if they were not initially required.
Q4. Shall flow sheets and diagrams be considered drawings?
Yes. Flow sheets and diagrams shall be considered drawings.
Q5. What time limit shall apply if a designated office requires drawings under Article 7(2)(ii)?
The time limit shall be reasonable under the circumstances of the case and shall, in no case, be shorter than two months from the date of the written invitation requiring the drawings.
Q6. Are new drawings required in the national phase if PCT Rule 11 was followed?
Not necessarily. Drawings that comply with PCT Rule 11 at the international phase may be accepted during the national phase. However, an examiner may require new drawings if those submitted earlier do not meet PCT Rule 11 standards.
Q7. Can an entire missing sheet of drawings be corrected later?
Generally, no. The omission of an entire sheet cannot be rectified without affecting the international filing date, unless:
- The application was filed on or after April 1, 2007.
- It included a priority claim.
- A proper incorporation by reference statement was filed on the same date.
- The correction was fully contained in the earlier application.
Q8. Are rectifications of obvious mistakes in drawings considered amendments?
No. Rectifications of obvious mistakes are not considered amendments.
Q9. When can drawings be amended in the patent process?
Drawings can be amended:
- During the international phase, if a Demand for international preliminary examination is filed
- During the national phase, provided that the amendment does not go beyond the original disclosure in the international application.
Reference: PCT Article 34(2)(b)
Q10. What should an examiner do if referenced drawings are missing from the search copy file?
According to Administrative Instructions Section 310, the examiner should refer the application to a Quality Assurance Specialist or a PCT Special Program Examiner.

Sheet Size, Usable Area, and Margin Requirements for Patent Drawings
Patent drawings must follow strict formatting rules. This section outlines the required sheet size, usable area, and minimum margins under PCT standards.
Q11. What sheet size is required for patent drawings under the PCT?
According to PCT Rule 11.5, the size of the sheets shall be A4 (29.7 cm × 21.0 cm). While a receiving Office may accept other sheet sizes, the record copy and search copy, if requested by the International Searching Authority, shall be of A4 size.
Q12. What shall be the maximum usable surface area for drawings on each sheet?
Under PCT Rule 11.6(c), the usable surface on sheets containing drawings shall not exceed 26.2 cm × 17.0 cm.
Q13. Shall frames be allowed around the usable surface on drawing sheets?
No. As stated in PCT Rule 11.6(c), sheets shall not contain frames around the usable or used surface.
Q14. What shall be the minimum margins for sheets containing drawings?
PCT Rule 11.6(c) prescribes the following minimum margins for sheets containing drawings:
Top: 2.5 cm
Left side: 2.5 cm
Right side: 1.5 cm
Bottom: 1.0 cm

Placement and Format Rules for Drawings in Patent Applications
This section explains how to correctly place, number, and format your patent drawings to meet PCT submission standards and avoid common rejections.
Q15. Where shall drawings be included in the international application?
Drawings must be presented on one or more separate sheets. They may not be included in the description, claims, or abstract, per 37 CFR 1.437.
Q16. How shall drawing sheets be numbered?
Each drawing sheet must be numbered in the center of either the top or the bottom of the sheet, but not in the margin. The numbers must not be larger than the reference signs to avoid confusion.
Q17. What format shall be used for drawing sheet numbers?
Sheet numbers must consist of two Arabic numerals separated by an oblique stroke (e.g., 2/5 means sheet 2 of 5 total sheets). A separate numbering series shall be used for drawings.
Q18. How shall figures within the drawings be numbered?
Figures must be numbered in Arabic numerals, consecutively and independently of sheet numbers. The numbering should be preceded by the expression “Fig.” and, if possible, arranged in the order they appear.
Source: Google Patent
Q19. How shall additional sheets be numbered if added later?
When adding sheets, each new sheet shall be identified using the number of the previous sheet, followed by a slash and a new Arabic numeral (e.g., 15/1, 15/2, 15/3). This system ensures clear tracking of additions.
Reference: Administrative Instructions Section 311.

Use of Text in Patent Drawings: What Is Permitted and How It Must Be Placed
Text in patent drawings is tightly restricted. This section outlines what words are allowed, when they’re necessary, and how they must be precisely placed.
Q20. Shall text be allowed in patent drawings?
No, except in very limited cases. As per PCT Rule 11.11(a), drawings shall not contain text matter, except for a single word or words when absolutely indispensable. Examples include terms such as “water,” “steam,” “open,” “closed,” or “section on AB.” In electric circuits or flow diagrams, a few short catchwords may be included if they are indispensable for understanding.
Q21. How shall any indispensable words be placed within the drawings?
According to PCT Rule 11.11(b), any words used shall be so placed that, if translated, they may be pasted over without interfering with any lines of the drawings.
Special PCT Drawing Requirements: Line Quality, Proportions, Figures, and Reference Signs
From line weight to figure arrangement, this section outlines the exact technical drawing standards required by the PCT to ensure full compliance.
Q22. How shall lines and strokes in drawings be executed?
According to PCT Rule 11.13(a), drawings shall be executed in durable, black, sufficiently dense and dark, uniformly thick and well-defined lines and strokes, without any coloring.
Q23. How shall cross-sections be indicated in drawings?
Per PCT Rule 11.13(b), cross-sections shall be indicated by oblique hatching that does not impede the clear reading of reference signs and leading lines.
Q24. What graphical standard shall drawings meet for scale and reproduction?
According to PCT Rule 11.13(c), the scale and graphical clarity of the drawings shall be such that a photographic reproduction at two-thirds size shall allow all details to be distinguished without difficulty.
Q25. How shall scale be shown when used in a drawing?
Under PCT Rule 11.13(d), when a scale is included in a drawing, it shall be represented graphically.
Q26. How shall numbers, letters, and reference lines appear in drawings?
As per PCT Rule 11.13(e), they shall be simple and clear. Brackets, circles, or inverted commas shall not be used with numbers and letters.
Q27. Shall lines be hand-drawn or drawn using drafting instruments?
According to PCT Rule 11.13(f), all lines in the drawings shall, ordinarily, be drawn with the aid of drafting instruments.
Q28. How shall the proportions of elements in a figure be maintained?
Each element shall be in proper proportion to the others, unless a different proportion is indispensable for clarity, according to PCT Rule 11.13(g).
Q29. What shall be the minimum height of letters and numbers in drawings?
As stated in PCT Rule 11.13(h), the minimum height shall be not less than 0.32 cm. The Latin alphabet and, where customary, the Greek alphabet shall be used.
Q30. What happens if the text in the drawings is not in English or an accepted PCT language?
If the drawings contain text in a language not accepted under PCT Rule 12.1(a), the application will be denied an international filing date. If the language is accepted, the application will be transmitted to the International Bureau for processing, as per 37 CFR 1.437 and 37 CFR 1.412(c)(6)(ii).
Q31. Can several figures appear on one drawing sheet?
Yes. PCT Rule 11.13(i) allows multiple figures on a sheet. If figures across sheets form one complete figure, they shall be arranged so they can be assembled without concealing any part.
Q32. How shall the figures be arranged on the sheet?
According to PCT Rule 11.13(j), figures shall be arranged without wasting space, preferably in an upright position, and be clearly separated from one another. When not arranged upright, the figures shall be presented sideways with the top of the figures at the left side of the sheet.
Q33. How shall different figures be numbered?
Under PCT Rule 11.13(k), different figures shall be numbered in Arabic numerals consecutively, independently of sheet numbering.
Q34. May applicants include a file reference on drawing sheets?
Yes. A file reference may be indicated in the upper left corner of each sheet of the drawings.
Q35. May reference signs appear in the drawings if they are not mentioned in the description?
No. According to PCT Rule 11.13(l), reference signs not mentioned in the description shall not appear in the drawings, and vice versa.
Q36. Shall the same features use consistent reference signs?
Yes. As per PCT Rule 11.13(m), the same features, when denoted by reference signs, shall be represented by the same signs throughout the application.
Q37. What is recommended when there are many reference signs in the drawings?
PCT Rule 11.13(n) strongly recommends attaching a separate sheet listing all reference signs and the features denoted by them.
Q38. Are photographs allowed in PCT applications instead of drawings?
No, the PCT makes no provision for photographs. However, the International Bureau may allow them in exceptional cases where drawings cannot adequately depict the subject (e.g., crystalline structures).
Source: Google Patent
In such cases, the photographs:
- Must be black and white.
- Must be printed on A4-size sheets.
- Must respect minimum margin requirements.
- Must allow for direct reproduction.
- Color photographs are not accepted.
These patent drawing requirements are nuanced, but getting them right keeps your patent application moving. If you’d like expert help, Pinch can turn your sketches into fully compliant drawings quickly and accurately.
Pinch – Your One-Stop Shop to Get Compliant Patent Drawings Quickly and Cost-Effectively
Patent drawings are much more than illustrative extras. They are legal documents held to pretty high standards. Whether filing a utility, design, or plant patent application, following the PCT drawing requirements is essential for ensuring your submission is complete, compliant, and positioned for successful examination.
Pinch Patent Drawings helps you simplify this process by automatically converting your CAD files into fully compliant, professionally formatted patent drawings that meet all PCT standards.
If you’re looking for a faster, easier way to handle patent drawings— without risking rejections or seeking services from an illustrator—let Pinch take care of it for you.
First use is free at sign-up!
Disclaimer:
This article is based on the information provided on 1825 The Drawings [R-08.2017]. Every effort has been made to simplify the content for patent filers.
The information presented herein reflects the most current regulations available at the time of publication. However, any updates or changes to the regulations made after the publication date may not be included. We recommend that readers consult official PCT resources to confirm the most recent requirements before proceeding with their patent filings.